WC Series

Wall Mounted Air Conditioner


Single package, wall mounted air conditioner units for use in industrial and/or hazardous applications


  • *Certified by CSA (bearing the CSA mark) for compliance to applicable codes and standards
  • Spark resistant fan and blower construction
  • EPA approved, HFC type, R-410a refrigerant
  • Fully insulated evaporator section for quiet operation
  • Supply and return air registers for ductless air handling
  • Built-in thermostat
  • Side and bottom mounting angles furnished
  • High and low refrigerant pressure switches
  • Protective coatings for prolonged life of cabinet and chassis


  • Total nominal cooling from 1 to 6 tons
  • Steam heating coil with connections
  • Protective component coatings for prolonged life in corrosive environments
  • Heat pump operation also available [WARNING: heat pump systems are not suited for heating operation in ambient temperatures lower than 45°F (7°C)]
  • Electric heat (limited by temperature code and system size)
  • Single or three phase operation in 60 or 50 Hz applications
  • Configurable for operation in various non-hazardous and hazardous rated locations
  • Type 316 stainless steel cabinet and chassis for corrosion protection
  • Corrosion resistant coatings for refrigerant coils and tubing (proven to withstand 10,000
  • hours of salt spray test)
  • Totally Enclosed Fan-Cooled (TEFC) motors
  • Ventilation packages to maintain specified air changes
  • Low/High ambient packages for operation in extreme environments


  • Analyzer buildings
  • Gas chromatograph buildings
  • Control rooms/cabins, living quarters, plant office buildings, break rooms, and other manned applications
  • MCC, RIE, DCS, LER, power, and switchgear buildings